Shop By
Flat Washers
Round flat washers are the most common type of washers supplied and they have the most uses. They are used to span oversized holes, and can spread loads over wider areas. They prevent surface damage and embedment from nuts and bolts, and provide a consistent surface for more predictable joints. They can also be used as shims to compensate for tolerance variations.
Willie Washer stocks over 60,000 different special washers for same day shipments. Check our inventory for various sizes, shapes, materials and finishes.
| ID | OD | T | Bolt Size (Inch) | Material | Finish | Stock | Request a Quote |
|---|---|---|---|---|---|---|---|
| 0.064 in. | 0.125 in. | 0.010 in. | Stainless - 300 Series | 16900 | Part Detail/Quote | ||
| 0.064 in. | 0.125 in. | 0.015 in. | Stainless - 300 Series | 230000 | Part Detail/Quote | ||
| 0.064 in. | 0.125 in. | 0.016 in. | Stainless - 300 Series | 0 | Part Detail/Quote | ||
| 0.064 in. | 0.125 in. | 0.019 in. | Brass | 14750 | Part Detail/Quote | ||
| 0.064 in. | 0.125 in. | 0.019 in. | Stainless - 300 Series | 11100 | Part Detail/Quote | ||
| 0.065 in. | 0.125 in. | 0.010 in. | #0 | Low Carbon Steel - Soft | Nickel | 19000 | Part Detail/Quote |
| 0.065 in. | 0.125 in. | 0.016 in. | #0 | Brass | 0 | Part Detail/Quote | |
| 0.065 in. | 0.125 in. | 0.025 in. | #0 | Aluminum | 32500 | Part Detail/Quote | |
| 0.065 in. | 0.125 in. | 0.025 in. | #0 | Brass | 32975 | Part Detail/Quote | |
| 0.065 in. | 0.125 in. | 0.025 in. | #0 | Brass | Cadmium & Yellow | 171650 | Part Detail/Quote |
| 0.065 in. | 0.125 in. | 0.025 in. | #0 | Low Carbon Steel - Soft | Zinc & Clear | 2700 | Part Detail/Quote |
| 0.065 in. | 0.125 in. | 0.025 in. | #0 | Stainless - 300 Series | 5600 | Part Detail/Quote |
