- Home
- Flat Washers
- Rivet Burrs | Flat Washers
Rivet Burrs | Flat Washers
Rivet Burrs are made to be used with rivets of all types. Our selection of burrs are designed to handle copper, brass, and leather rivets. Burrs have tighter inside diameters than typical washers to fit tightly on rivets of different sizes. Burrs are positioned over the rivet shank. Use a hammer on the end of the rivet to secure the burr in place. This tight fit helps to keep the rivet from pulling out of the burr when assembled. Please note: The burr sizes are numbered after wire gauges, not bolt sizes, so make sure you look for the proper sized hole diameter prior to purchasing a burr. (For example, a #10 Rivet Burr has a completely different inside diameter than a washer for a #10 screw.) Choose a Rivet Burr that meets the specifications of your project.
Choose from our selection of Rivet Burrs, fender washers, clipped OD washers, slotted square washers, and D shaped ID washers. Contact a specialist with questions about rivets and burrs.
Rivet Size | O.D. | I.D. | Thickness | Wt Per 1000 |
3/8 | 7/8 | 25/64 | .051/.080 | 8.8 |
5/16 | 3/4 | 21/64 | .051/.080 | 6.5 |
#3 (1/4 ) | 5/8 | 17/64 | .036/.065 | 3.5 |
#4 (.238) | 5/8 | 1/4 | .036/.065 | 3.6 |
#5 (.220) | 5/8 | 15/64 | .036/.065 | 3.7 |
#6 (.203) | 1/2 | 7/32 | .036/.065 | 2.2 |
3/16 | 1/2 | 13/64 | .036/.065 | 2.3 |
#7 (.180) | 1/2 | 3/16 | .036/.065 | 2.3 |
#8 (.165) | 1/2 | 11/64 | .036/.065 | 2.4 |
#9 (.148) | 7/16 | 5/32 | .036/.065 | 1.8 |
#10 (.134) | 7/16 | 9/64 | .036/.065 | 1.9 |
#11 (.120) | 7/16 | .135 | .036/.065 | 1.9 |
Please contact our sales department for help with these products
- Laser Cut Parts
- Spacers & Machined Parts
- Flat Washers
- Shop Low Carbon & Stainless Steel Fender Washer Sizes
- Heavy & Thick Fender Washers
- SAE Flat Washers | Type A Flat Washers
- USS Washers | Type A Wide Washers
- Type B Narrow Flat Washers
- Type B Regular Flat Washers
- Type B Wide Flat Washers
- Domestic Flat Washers | Stainless Steel & Bronze
- Hardened Washers | Flat Washers
- Shim Flat Washer
- Dock Flat Washers
- Thrust Washers & Bearings
- Machine Screw Washers
- Machinery Bushings | Steel Bushings
- Military Flat Washers
- Rivet Burrs | Flat Washers
- Metric Flat Washers | Metric Fasteners
- Non-Metallic Flat Washers
- Special Shapes
- Square OD Washers | Square Plate Washers
- C Shaped Washers & Slotted Washers | Retaining Washers
- Clipped OD Washers | Weld Washers
- ‘D’ Shaped ID Washers | Clipped Washers
- Square ID Hole Washers | Carriage Bolt Washers
- Slotted Square Washers | Slotted Washers
- Internal & External Tab Washers | Lock Washers
- Pant Leg Washers | Tab Washers
- Shop Spring Washers
- Shop Cup Washers
Filter
- Category